April 18, 2017
Do you need an extremely fast CNC?
Choose our LOV-622-2TS.
It is equipped with 2 high precision electrospindles, able to process 2 glasses in the same time.
Moreover, it is equipped with a special working table divided in 2 sliding parts; while the machine is precessing two glasses on one side of the table, the second part moves towards the external side and you can load/unload glasses. You never loose time for loading/unloading!
April 3, 2017
March 20, 2017
Would you like to renew your old Lovati CNC?
Choose our rebuilding service!
We are available to check and rebuild your old Lovati machine.
During our rebuilding service, we completely dismantle the machine, we check, overhaul or replace every single part. Your old machine will become as brand new and will be covered by our standard warranty.Contact us for further details!
March 6, 2017
February 11, 2017
Do you need a perfect bevel?
Choose our CNC type ZEPHYR!
It has 5 axis with linear and circular interpolation of axis X, Y, Z, A for head rotation and B for spindle inclination. The A axis can rotate 360" in continuous mode.
Thanks to the 5 axis, the head can have a maximum inclination of +/-90 degrees (horizontal position). This characteristic allows to grind the bevel and the flat edge on high thickness glass with any type of required inclination and by using cup wheels instead of peripheral wheels.
ZEPHYR can do beveling even on internal mitred corners; in fact, the special spindle head has been designed in order to keep the wheel’s band, which is in contact with the glass, constantly on vertical position of A axis, with any inclination of the spindle.
This characteristic allows to obtain a perfect bevel!
February 3, 2017
January 17, 2017
Many cornerns to process?
Choose our CNC for corners type TWIN07!
It is equipped with 2 grinding head, one movable and one fixed, to process 2 high quality corners at the same time, with perfect conjunction of the angle with the straight part.
January 7, 2017