5 axis CNC|
Numerical control machine with 5 interpolated axis to grind and polish the edge and the bevel on shaped glasses with internal curves, external curves, straightline sides, as well as external and internal mitred corners.
It is possible to work any shape and profile by means of linear and circular axis interpolation.
In addition to grinding and polishing of the bevel and the edge, this machine can also perform holes, pin and screw inserts, internal and external milling and routing.
By using angular groups (optional) the machine can make sawing and grooving on shapes.
On the spindle it is possible to stack one bevelling wheel or two diamond wheels and one polishing wheel for grinding and polishing the edge.
More than one glass sheet can be positioned on the working table.
- Tool crib with automatic selection for tool withdrawal and deposit
- Special cerium oxide spraying unit to polish the bevel
- Software program to position the special stops for centering the glass and to position the suckers for fixing it on the table
- CAD/CAM automatic design station
- Teleassistance by Internet
ZEPHYR is equipped with a special head which can have a maximum inclination of +/-90 degrees (horizontal position).
This characteristic allows to grind the bevel and the flat edge on high thickness glass with any type of required inclination.
||3250 x 1650 mm
||4200 x 2300 mm|
||3 - 100 mm
||3 - 100 mm|
||5 - 40 mm
||5 - 40 mm|
||0° - 90°
||0° - 90°|
|Diameter of the wheels
||150 mm max
||150 mm max|
|Programmable spindle rounds
||0 - 12000 rpm
||0 - 12000 rpm|
|Compressed air pressure
Watch our videos!